Safety precautions when working on the airbag system |
l
| Testing, assembly and repair work should only be carried out by specialised personnel |
l
| When working on the Airbag system, the battery earth cable must be removed. After disconnecting the battery, work can be recommenced immediately When connecting the airbag to a power supply nobody should be inside the vehicle |
l
| The airbag units should be fitted as soon as they are removed from their packing box |
l
| If work has to be stopped, the airbag unit should be replaced in its box again |
l
| The airbag unit must not be left lying around unsupervised |
l
| Dismantled airbag units should be kept with their padded surface facing upwards |
l
| Airbag units that have fallen on a hard surface or show signs of damage cannot be refitted |
l
| Storage and transportation should be made in accordance with the regulations concerning explosive material |
l
| Only use original upholstering fabric certified for side impact airbags (indicated on the airbag) |
l
| On fitting the seat back upholstery, make sure that the seam in the side airbag area is straight |
l
| All the upholstery staples must be replaced |
l
| Only use original uphostery staples |
l
| If the fabric in the side impact airbag area is damaged (torn, burnt, etc.), the upholstery should be replaced for greater safety |
|
|
|