Leon Mk2
Door soundproofing panels: removing and fitting |
The panels of soundproofing help to insulate the interior of the vehicle from noise, the entrance of water and draughts. |
The replacement soundproofing panels are self-adhesive |
The soundproofing panels should be carefully stuck on without creases. To replace, clean the areas to be glued and stick the new panel from the bottom up without creases |
Removing |
– | Removing the door linings → Chapter |
– | Unclip the staples -arrows- from the door using the tool -T20065- |
– | Unclip the staple from the Bowden cable of the door system and replace, if necessary when reassembling |
Installation |
– | Insert the connections and the Bowden cable through the panel and remove the protective tape from the adhesive region |
– | Centre the panel with respect to the openings for the securing staples, and attach the panel |
– | Check that the panel is correctly attached to the door, especially in the lower region |