Removing and installing gearbox input speed senderG182 and clutch temperature senderG509
Removing and installing gearbox input speed senderG182 and clutch temperature senderG509
Removing and installing gearbox input speed sender -G182- and clutch temperature sender -G509 -
Brief description
Both senders are combined in one component and can be renewed together only. They are »bathed in oil« in gearbox near the multi-clutch. Before removal, the mechatronic unit for dual clutch gearbox -J743- must be removed.
The sensor cable is often damaged due to pulling on it. Consequently, if the cable is pulled on, the sender must be renewed.
