seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

Oil filter: replace > < Pendulum support: dismounting and assembly
Oil and oil filter
Oil and oil filter
  Note
t  Cleaning norms when working in the gearbox → Chapter.
t  General repair instructions. → Chapter
t  See information relative to semi-automatic gearbox 02E, regulations for oil waste management → Chapter
t  Breather pipe of adapter for oil filling -VAS 6262 A- may need to be shortened.
Shortening breather pipe of adapter for oil filling -VAS 6262 A-:
   
–  In order to ensure that the breather pipe of the adapter for oil filling -VAS 6262 A- does not contact the bottom of some oil bottles, the pipe must be shortened to the length -a-.
Dimension -a- = 210 mm
  Note
The dimension -a- is measured from the shaft (green area in the counting glass) of the adapter for oil filling -VAS 6262 A-.
  N34-11768
–  Mark dimension -a- on the breather pipe and shorten pipe with pipe cutter -VAS 6056/2-.
  N34-11769

Oil filter: replace > < Pendulum support: dismounting and assembly