t
| Adapter for oil filling -VAS 6262 A- |
t
| Torque wrench kit -SAT 8010-, see equivalent → Anchor |
l
| Vehicle on a level, all lifting platform housings at the same height. |
l
| Soundproofing sump removed, where applicable. |
l
| Selector lever must be in position „P“. |
l
| Diagnosis tester -VAS 505X- connected |
l
| The oil temperature must not be higher than 45 ℃ at the beginning of the work. |
–
| Comply with rules for cleanliness when working on gearbox. |
–
| Only gear oil available as spare part is allowed to be used for dual clutch gearbox. Other types of lubricant cause malfunctions and/or failure of the gearbox. |
WARNING Hot gearbox oil can cause burns. |
|
–
| Connect vehicle diagnosis, testing and information system -VAS 5051B- and identify the vehicle in Guided functions. |
–
| Select dual clutch gearbox. |
–
| Select Check fluid level. |
Note If oil temperature is above 45 °C, let the gearbox cool off. |
WARNING Do not start engine if there is no oil in gearbox. |
|
–
| Engine off - Do not start engine! |
|
|
|