seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Parts of cooling system - engine side > < Removing and installing parts of cooling system

Leon Mk2

4-cyl. Diesel engine, Mechanics
Removing and installing parts of cooling system
Parts of cooling system body side
 
N19-0053
  • Rubber mounting
  • Radiator
    • ◆ Removing and installing
      =>Page 19-13
    • ◆ After replacing renew entire coolant
  • Reinforcing strip
  • Upper coolant hose
    • ◆ To connection
      =>Page 19-5, Item 1
  • 10 Nm
  • Speed nut
  • Lower coolant hose
    • ◆ To coolant pump
      =>Page 19-6, Item 15
 
N19-0053
  • Air intake ducting
  • Actuator unit
    • ◆ Opens at 28±2 °C
    • ◆ Checking: if engine is cold (coolant temperature below 25 °C) shut-off ring item 12 closed
  • 4 pin connector
    • ◆ Black
  • Retaining clip
  • Shut-off ring
  • Radiator fan
    • ◆ Engine codes AFN, AVG with additional fan as optional extra
    • ◆ Removing and installing
      =>Page 19-13
 
N19-0053
  • Connector
    • ◆ Black, 3 pin
    • ◆ For radiator fan thermo switch
  • Radiator fan thermo switch (F18),
    35 Nm
    • ◆ Switching temperatures:
      Stage 1
          on: 92...97 °C
          off: 84...91 °C
      Stage 2
          on: 99...105 °C
          off: 91...98 °C
  • Retainer

Parts of cooling system - engine side > < Removing and installing parts of cooling system