Leon Mk2
Removing and installing parts of cooling system
Draining and filling cooling system
Special tools, workshop equipment, testers, measuring instruments and auxiliary items required |
|
Draining Warning !
Steam can be released when removing the cap from the expansion tank. Cover cap with a cloth and open carefully.
=> General body repairs; Repair group 50; Front body; Removing insulation tray |
Note: Observe disposal regulations! Filling Notes:
|
Recommended mixture ratios:
1) The amount of anti-freeze must not exceed 60 %; frost protection and cooling effect will decrease if amount of anti-freeze is too high. 2) The amounts of coolant given in table relate to vehicles with manual gearbox. For vehicles with automatic gearbox the amount of G12 and water both increase by approx. 0.1 ltr.
With cooling system charging unit VAS 6096 |
=> Operating instructions for cooling system charging unit VAS 6096 Not using cooling system charging unit VAS 6096
With and without cooling system charging unit VAS 6096
Warning !
Steam can be released when removing the cap from the expansion tank. Cover cap with a cloth and open carefully.
|