seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Parts of cooling system engine side > < Removing and installing parts of cooling system

Leon Mk2

5-cyl. injection engine, (4-valve), Mechanics
Removing and installing parts of cooling system
Parts of cooling system body side
 
N19-0337
  • Rubber mounting
  • Radiator
    • ◆ Removing and installing
      =>Page 19-23
    • ◆ After replacing renew entire coolant
  • 8 Nm
  • Radiator fan thermo-switch (F18), 35 Nm
    • ◆ Switching temperatures:
      Stage 1
          on: 92...97 °C
          off: 84...91 °C
      Stage 2
          on: 99...105 °C
          off: 91...98 °C
 
N19-0337
  • Connector
    • ◆ Black, 3 pin
    • ◆ For radiator fan thermo switch
  • Rubber bush
  • Air ducting
  • 9 Nm
  • Right radiator fan (V35)
    • ◆ With fan ring
    • ◆ Only vehicles with optional equipment
    • ◆ Removing and installing
      =>Page 19-23
  • Bracket
    • ◆ For lower coolant hose
  • Left radiator fan (V7)
    • ◆ With fan ring
    • ◆ Removing and installing
      =>Page 19-23
 
N19-0337
  • Connector
    • ◆ Black, 2-pin
    • ◆ For radiator fan
  • Lower coolant hose
    • ◆ Check seated securely
    • ◆ Coolant hose connection diagram =>Page 19-11
  • Quick-release coupling
    • ◆ With retaining clip
    • ◆ Check seated securely
  • O-ring
    • ◆ Renew if damaged
  • Upper coolant hose
    • ◆ Check securely seated
    • ◆ Coolant hose connection diagram =>Page 19-11

Parts of cooling system engine side > < Removing and installing parts of cooling system