Leon Mk2
→ Indicated on display: |
|
||
|
→ Indicated on display: |
|
||
|
→ Indicated on display: (1...10 = Display zones) |
|
||
The commencement of injection in display zone 2 is dependent on the fuel temperature in display zone 9. |
Example: The numerical value 90 in display zone 9 (B) corresponds to a numerical value range of 34...73 in display zone 2 (A). Notes:
Note: Loosen and re-tighten (25 Nm) the injection pipes on the injection pump after dynamically adjusting the injection pump. This relieves the strain on pipes and prevents vibration breakages. |