-
‒ Depress the brake pedal.
Specification: ∞ ω (no continuity)
If the specifications are not attained:
-
‒ Replace the brake light/brake pedal switch.
If the specifications are obtained:
-
‒ → Connect multimeter to measure voltage between contact 1 and earth.
Specification: at least 11.5 V
-
‒ Switch ignition on.
-
‒ Connect the multimeter to measure voltage between contact 2 and earth.
Specification: at least 11.5 V
If the specifications are not obtained:
-
‒ Check wiring between 4-pin connector contacts 1 and 2 and multi-function unit using current flow diagram.
=> Current flow diagrams, Electrical fault finding and Fitting locations binder
If the specification is obtained:
|