Leon Mk2
Evaporator housing: dismantling and assembling |
Caution
|
Note!
t | Before disconnecting the battery check anti-theft coding on the radio |
t | If the battery is reconnected check the vehicle equipment (radio, clock, electric comfort system, etc.) following the indications in the Workshop Manual and/or the Operating Instructions |
t | First remove the refrigerating agent with the unit -SAT 4006B- |
t | It is possible to continue using the service instruments used to date → V.A.G and SAT workshop equipment filing cabinet |
t | All the coolant agent circuit components that are open must be closed off with plugs in order to prevent moisture from entering |
t | Underlined parts may be replaced after dismounting the evaporator |
Removal |
– | Remove the refrigerating agent with the unit -SAT 4006B-. |
Note!
It is prohibited to release coolant agent into the athmosphere. |
– | Drain coolant. |
– | Dismantling instrument panel. → General body repairs - Assembly work, interior; Rep. Gr.70 |
– | Remove the heating and air conditioning units. |
1 - | Housing, upper part |
2 - | Fresh air blower with overheating fuse series resistor -N24- |
q | Removal and installation → Fig. |
3 - | Air intake box |
q | With fresh air flap and air recirculation |
4 - | Suction ring |
5 - | Depressant for fresh air flap and air recirculation |
6 - | Fresh air blower -V2- |
7 - | Housing, upper part |
8 - | Seal bead |
q | Blocks the water |
9 - | Clip |
10 - | Air conditioning distributor box |
q | Do not continue to take apart |
11 - | Heat exchanger |
12 - | Evaporator |
q | After the dismount you should renew all the coolant |
13 - | Gasket |
q | Renew |