t
| After removing the corresponding refrigerant line it is necessary to replace the quick-release coupling connections -B- and -G- together with the associated support ring -E- or -H- and O-ring -F- or -J-. → Air conditioning; Rep. gr.87 and → Parts catalogue. |
A - | Retaining ring (in quick-release coupling, high-pressure side) |
B - | Quick-release coupling with retaining ring („high-pressure side“) |
C - | Refrigerant line with internal heat exchanger |
D - | Refrigerant line („high-pressure side“) |
E - | Support ring („high-pressure side“) |
F - | O-ring („high-pressure side“) |
G - | Quick-release coupling with retaining ring („low-pressure side“) |
H - | Support ring („low-pressure side“) |
J - | O-ring („low-pressure side“) |
|
|
|