If the refrigerant does not have to be cleaned (e.g damaged in an accident), no refrigerant has escaped and no ingress of moisture and dirt into refrigerant circuit |
–
| Drain refrigerant circuit. |
–
| Disassemble the fluid tank or collecting tank. |
–
| Clean any dirt in the liquid tank or collecting tank. |
–
| Weigh the disassembled liquid tank or collecting tank. |
Note t
| Fill the new liquid tank or collecting tank with as much refrigerant oil as necessary to reach the weight of the disassembled tank. |
t
| Assemble the new fluid tank or collecting tank. |
–
| Assemble, vacuum and charge the refrigerant circuit. |
|
|
|