| Overview | page |
| Fin comb | → Fig. |
| Charging hoses 5/8”-18 UNF with valve opener | → Fig. |
| Connection parts for refrigerant bottles and seal for quick coupling connection or screw connection 5/8” - 18 UNF | → Fig. |
| Valve caps 5/8”-18 UNF | → Fig. |
| Manometer bank with pressure relief valve for nitrogen | → Fig. |
| Quick coupling adaptor for service connections, 2 units included with the service station | → Fig. |
| Open end spanner. The spanner widths correspond with the screw connections of the refrigerant hoses. | Not illustrated |
| Valve opener for charging hoses. | Not illustrated |
| Joint nozzle for conical surface seal 5/8” - 18 UNF | Not illustrated |
| Compressed-air gun with rubber nozzle | Not illustrated |
| Valve opener for Schrader valves | Not illustrated |
| Manual shut-off valve 5/8” - 18 UNF | Not illustrated |
| Recycling bottle for refrigerant R134a | Not illustrated |
| Digital thermometer | → Fig. |
| Protective glasses | Not illustrated |
| Refrigerant R134a with pressurized bottle (contents according to demand) | Not illustrated |
| Nitrogen with pressurized bottle | Not illustrated |
| Clamp spanner (oil filter) as retention tool for Poly-V belt pulley | Not illustrated |
Caution