t
| A- The pressure in the refrigerant circuit is less than shown in the tables, (insufficient refrigerant in the circuit). |
- Check for leaks using leak detector. |
- The high-pressure safety valve has opened; check the activation for the radiator fan according to the current flow diagram. |
Check refrigerant pipes and refrigerant hoses for bends that have too tight radius (restrictions in cross-section) and for external damage. If no faults are found, purge the refrigerant circuit. |
t
| B- The pressure in the refrigerant circuit is greater than or equal to the value in the table. |
–
| Set air conditioning system to maximum cooling power. |
–
| Open vents in dash panel. |
The air conditioner compressor is driven by the engine, via the V-belt and magnetic clutch. |
Note! t
| If the air conditioner compressor is not being driven, check the power supply for the air conditioning system magnetic clutch -N25- in accordance with the current flow diagram. |
t
| If the power supply is OK, repair the magnetic clutch. |
If the air conditioner compressor is not being driven, check the refrigerant circuit: |
–
| Raise engine speed to 2 000 rpm. |
–
| Observe the manifold gauge. |
|
|
|