seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Removing and installing dust and pollen filter > < Removing and installing air recirculation flap control motorV113

Leon Mk2

Removing and installing fresh air blowerrV2
Removing and installing fresh air blowerr -V2-
Removal:
–  Remove the passenger side foot well cover according to the version of the model → Bodywork, interior fitting work; Rep. gr.68.
–  Remove glove compartment → General body repair, interior; Rep. gr.68.
–  Remove the passenger side foot well cover → Bodywork, interior fitting work; Rep. gr.68.
   
–  Remove bolt -A-.
–  Cut the cable ties to those fitted in the fresh air turbine housing cables -C-
–  Release the block -B- and rotate the fresh air blower housing -C- in -the direction of the arrow-.
  Note
t  Sealing compound may have been applied to connection between housing of fresh air blower -C- and air conditioner unit. Greater force is then required to turn housing.
  A87-0707
t  The fresh air blower -V2- is installed in housing -C-.
–  Remove housing of fresh air blower-C- from air conditioning unit.
  Caution
Do not touch the wheel of the fresh air blower -V2-; the use of force on the wheel or movement of the counterweights can cause imbalance which could lead to malfunction.
–  Unplug connector -D-.
Installation
Re-install all parts removed in reverse order; note the following:
  Note
t  When installing, make sure that fresh air blower is correctly seated in air conditioning unit.
t  After installing, check the housing for fresh-air blower in air conditioner for its correct fit.
–  Consult the fault memory of the control and indication panel Air conditioning control unit -J301- and erase the faults that appear. → Vehicle diagnostic, testing and information system VAS 505X in "Guided fault finding" function.
–  Carry out the basic setting and diagnosis of the air conditioning actuators the consult the fault memory once again. → Vehicle diagnostic, testing and information system VAS 505X in "Guided fault finding" function.
  A87-0707

Removing and installing dust and pollen filter > < Removing and installing air recirculation flap control motorV113