seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Removing and installing flexible shaft for air distribution > < Removing and installing defroster and air distribution flap actuator

Leon Mk2

Removing and installing fresh air/recirculated air flap actuator
Removing and installing fresh air/recirculated air flap actuator
Removal:
–  Remove glove compartment → General body repairs, interior; Rep. gr.68.
   
–  Detach fresh/recirculated air flap cable -5- from fresh/recirculated air flap.
–  Pull actuators -1- and -4- off housing.
Installation
  N87-10913
–  Before installing, check that actuators -2- and -3- are properly aligned with notches -arrow A-.
t  Check function of actuator.
  Note
It must be possible to move the fresh/recirculated air flap actuator to its end positions easily and smoothly.
Adjustment of fresh/recirculated air flap actuator not OK:
–  Remove actuator and repeat installation, as described.
Adjustment of fresh/recirculated air flap actuator OK:
–  Perform remaining installation in reverse order of removal.
  N87-10913

Removing and installing flexible shaft for air distribution > < Removing and installing defroster and air distribution flap actuator