seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Removing and installing intermediate piece for windscreen defroster duct|Fitting > < Removing and installing intermediate piece for windscreen defroster duct

Leon Mk2

Removing
Removing
–  Removing and installing instrument panel: → General body repairs, interior; Rep. Gr.70
–  Detach mounting bracket for brake pedal (and clutch pedal) from dash panel cross member. → Brake system; Rep. Gr.46
   
–  Unfasten hexagon nuts -A- for dash panel cross member on left and screw out by approx. 15 mm. → General body repairs, interior; Rep. Gr.70
–  Remove hexagon nuts -B- for dash panel cross member on right → General body repairs, interior; Rep. Gr.70.
–  Remove connecting bolts between dash panel cross member and windscreen cross member (in passenger compartment), as well as connecting bolts between dash panel cross member and plenum chamber (between electronics box and windscreen cross member in plenum chamber). → General body repairs, interior; Rep. Gr.70
–  Carefully pull dash panel cross member to rear until it makes contact with nuts on left, whilst still resting on threaded pin on right.
  A87-0456
–  Detach intermediate piece -A- from dash panel cross member -B-.
–  Remove intermediate piece -A-.
  A87-0414

Removing and installing intermediate piece for windscreen defroster duct|Fitting > < Removing and installing intermediate piece for windscreen defroster duct