seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Removing and fitting the refrigerant pipe from the compressor > < Removing

Leon Mk2

Fitting
Fitting
Installation is carried out in the reverse order of removing, when doing this note the following.
   
–  Replace O-rings -B- and -C-; for version refer to → Spare parts catalogue
–  Install refrigerant pipes such that they are not strained.
–  After attaching refrigerant pipes, check proper installation of grommet -E- and bushing -F-.
–  Check the location of the refrigerant pipes to the evaporator, they must not be in contact with other components.
–  Check type of seal at connections and refrigerant pipes (must be designed for same type of seal) → Chapter and → Spare parts catalogue
–  Evacuate and refill the refrigerant circuit → Air conditioning with refrigerant R134a
  A87-0405

Removing and fitting the refrigerant pipe from the compressor > < Removing