seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Removing and fitting the condenser|Fitting > < Removing and fitting the condenser

Leon Mk2

Removing
Removing
–  Discharge refrigerant circuit → Air conditioner with refrigerant R134a.
–  Detach refrigerant pipes from condenser → Chapter.
–  Remove the air ducts between the bumper and the condenser.
–  If applicable, unfasten or remove power steering cooler (not always necessary, depends on vehicle) → Running gear; Rep. Gr.48
–  If applicable, unfasten or remove radiator fan control unit -J293- (not always necessary, depends on vehicle) → Engine, mechanics; Rep. Gr.19
–  Unplug connector from high-pressure sender -G65--B-.
   
–  Remove bolts -A- (tightening torque 5 Nm).
  A87-0407

Removing and fitting the condenser|Fitting > < Removing and fitting the condenser