Leon Mk2
Note
|
|
1 - | Ancillary bracket for alternator and air conditioner compressor |
q | Part No. 037 903 139 L |
– | Remove alternator → Rep. Gr.27. |
2 - | Tensioning element for tensioning roller |
3 - | Hexagon nut M8 |
q | 30 Nm |
4 - | Threaded bush |
5 - | Refrigerant hose |
q | Between expansion valve and air conditioner compressor |
q | Bolt 22 Nm |
6 - | Refrigerant hose |
q | Between air conditioner compressor and condenser |
q | Bolt 22 Nm |
7 - | Air conditioner compressor |
q | Remove air conditioner compressor → Chapter. |
q | Remove from ancillary bracket: |
q | Remove poly V-belt → Rep. Gr.13. |
– | Loosen hexagon bolts -9- by a few turns and drive back threaded bush -4- on air conditioner compressor. Continue unscrewing hexagon bolts. |
Running-in procedures → Chapter. |
8 - | Poly V-belt |
q | Removing and installing → Rep. Gr.13. |
q | Poly V-belt routing → Fig.. |
9 - | Hexagon bolt M10×11 |
q | 45 Nm |
10 - | Hexagon bolt M8×42 |
q | 25 Nm |
11 - | Tensioning roller |
Note
|