seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Servomotor for the temperature flap V68 : removing and fitting|Fitting > < Servomotor for the temperature flap V68 : removing and fitting

Leon Mk2

Removing
Removing
–  Removing the dashboard → Rep. Gr.70.
–  Removing the data bus diagnosis interface -J533- → Rep. Gr.97.
   
–  Remove the vent from the foot well area on the left side.
–  Unscrew bolts -1- and -3-.
  N87-10206
–  Remove the support -2-.
–  Mark the connector -C- for the servomotor (possible confusion with other similar connectors).
–  Detach the connector -C- of the temperature flap servomotor -V68-.
–  Remove the cover -A-.
–  Unscrew the fastening bolts -D- and remove the servomotor of the temperature flap -V68--B-.
–  Release the lever -E- of the servo motor from connecting rod -F-.
  A87-0711

Servomotor for the temperature flap V68 : removing and fitting|Fitting > < Servomotor for the temperature flap V68 : removing and fitting