If the circuit must be opened, use the conical plugs from the kit -T20017A- to avoid penetration of dust and humidity into the system. |
Service work which can be performed on the heater and air conditioner without opening the refrigerant circuit is described in this Workshop Manual → Chapter. |
Note The connections for the senders / switches mentioned in this workshop manual are provided with a valve which closes automatically when the switches are unscrewed. For this reason, these switches may be replaced in any Seat workshop when the air conditioning system is filled. |
Repair jobs on the climate control system requiring the drainage of the refrigerant circuit, which must therefore be carried out in specific SEAT workshops, are described → Chapter (to drain the refrigeration circuit the vehicle must be brought to a support workshop specialised in air conditioning systems). |
|
|
|