SEAT Workshop Service and Repair Manuals > Leon Mk2 > Heating, ventilation, air conditioning system | Heating and air conditioning | Air conditioner | Refrigeration agent circuit: repair | Detaching and attaching compressor from support

Attaching compressor to the support

Installation is carried out in the reverse order of removing, noting the following:

–	Before fitting the compressor, check the correct positioning of the two sleeves -arrow- on the support or on the compressor.

–	Fit a washer on each of the attachment bolts -arrows- (torque 25 Nm).

–	Check carefully following fitting of the compressor, the secure fitting of the refrigerant tubes. They must be secured in the supports designed for them (depending on the engine type).

–	After attaching compressor, also check refrigerant pipes and corresponding holders for adequate clearance with respect to other components; pay special attention to adequate distance between belt, support and pulley.

SEAT Workshop Service and Repair Manuals