seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Removing and installing rear fresh air blower control unitJ391 > < Removing and installing rear temperature flap control motorV137 with potentiometer for rear temperature flap control motorG479

Leon Mk2

Removing and installing rear fresh air blowerV80
Removing and installing rear fresh air blower -V80-
Removing
–  Remove luggage compartment trim side panel on right → General body repairs, interior; Rep. gr.70.
–  Remove rear temperature flap control motor -V137- → Chapter.
–  Disconnect connector -1- from rear fresh air blower -V80--2-.
–  Pull locking device -arrow- out forwards slightly.
   
–  Turn rear fresh air blower -V80--2- in -direction of arrow- and pull it out of housing.
Installing
–  Install rear fresh air blower -V80- in reverse order of removal.
  N87-10792

Removing and installing rear fresh air blower control unitJ391 > < Removing and installing rear temperature flap control motorV137 with potentiometer for rear temperature flap control motorG479