seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Removing and installing poly V-belt pulley (air conditioner compressor from ?Denso?) > < Checking high-pressure safety valve on air conditioner compressor

Leon Mk2

Assembly overview - poly V-belt pulley (air conditioner compressor from „Denso“)
Assembly overview - poly V-belt pulley (air conditioner compressor from „Denso“)
  Note
t  This type of poly V-belt pulley is installed on „7SEU17C“ air conditioner compressors.
t  Various types of poly V-belt pulley are installed depending on design of air conditioner compressor and type of engine → Parts catalogue.
t  Removing and installing poly V-belt pulley → Chapter.
   
1 - Cover
2 - Circlip
q   Remove carefully using a small screwdriver or long nose pliers (be especially careful with the poly V-belt pulley)
3 - Guide cage
4 - Circlip
q   Always renew
q   Install correctly (flat side faces air conditioner compressor)
5 - Shim
6 - Poly V-belt pulley
q   The poly V-belt pulley is constructed of plastic and is sensitive to impact. Therefore, handle the poly V-belt with extreme care.
q   Various versions → Parts catalogue
7 - Air conditioner compressor
q   Various types are installed, depending on type of engine and country version → Parts catalogue
q   Clean air conditioner compressor flange before fitting poly V-belt pulley
8 - Rubber element
q   Qty. 6
q   Flexible coupling between poly V-belt pulley and air compressor drive shaft, dampens vibrations and noise
q   Lightly moisten rubber elements with, for example, tyre assembly paste or soapy solution (used as a lubricant) when installing.

   

Removing and installing poly V-belt pulley (air conditioner compressor from ?Denso?) > < Checking high-pressure safety valve on air conditioner compressor