seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Removing and installing 2nd heat exchanger switch-off valveN317 > < Removing, installing and checking ventilation outlet

Leon Mk2

Removing and installing ambient temperature sensorG17
Removing and installing ambient temperature sensor -G17-
Removing
–  Remove front bumper cover → Rep. gr.63.
   
–  Disconnect connector from ambient temperature sensor -G17--1-.
–  Unhook retaining lug -arrow A- from retainer.
–  Pull ambient temperature sensor -G17--1- out of retainer downwards in -direction of arrow-.
Installing
–  Install in reverse order of removal.
  N80-10306

Removing and installing 2nd heat exchanger switch-off valveN317 > < Removing, installing and checking ventilation outlet