seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Removing and installing ambient temperature sensorG17 > < Removing and installing auxiliary air heater elementZ35

Leon Mk2

Removing, installing and checking ventilation outlet
Removing, installing and checking ventilation outlet
Special tools and workshop equipment required
   
t  Removal wedge -3409-
  Note
t  The stale air escapes via ventilation outlets in the luggage compartment trim.
t  If the ventilation is to function properly, the ventilation outlets must not be covered.
t  The ventilation outlets can be found on left and right in the side parts of the bumper.
Removing
–  Remove rear bumper cover → General body repair, interior; Rep. gr.63.
  W00-0016
–  Unclip ventilation outlet -1- from side panel -2- using removal wedge -3409-.
Checking
–  The sealing lips in the ventilation outlet must be free to move and close by themselves.
Installing
–  Clip ventilation outlet audibly into side panel.
–  Install rear bumper cover → General body repair, interior; Rep. gr.63.
  N80-10307

Removing and installing ambient temperature sensorG17 > < Removing and installing auxiliary air heater elementZ35