seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Removing glow plug for heater Q9 > < Dismantling and assembling auxiliary heater -D3W-

Leon Mk2

Removing heater control unitJ162
Removing heater control unit -J162-
Before beginning repair work, perform the following jobs:
–  Remove auxiliary heater → Chapter.
   
–  Dismantle and assemble auxiliary heater -D3W- → Chapter.
–  Pull 8-pin connector (T8) off.
–  Loosen both cross-head screws -2- on combustion air blower cover.
–  Remove cross head screws -3- and hexagon socket head bolts -4- and -5-.
–  Lift up heater control unit -J162--1-.
–  Pull 10-pin connector off.
  N82-0042

Removing glow plug for heater Q9 > < Dismantling and assembling auxiliary heater -D3W-