Leon Mk2
| Assembly diagram |
| I - | Dismantling and assembling the lid of the gearbox housing and the 5th gear → Chapter |
| If the lid can be removed or fitted with the gearbox in the vehicle, the oil level must be checked as follows: |
| – | Place the vehicle on a hoist. |
| – | Fill with oil to the lower lip of the filling hole and close with the stopper. |
| – | Start the engine, set a gear and allow the gear shafts to turn for 2 minutes approximately. |
| – | Stop the engine and refill with oil to the lower lip of the filling hole. |
| II - | Removal and refitting of the primary shaft, secondary shaft, differential and control bars → Chapter |
