SEAT Workshop Service and Repair Manuals
HOME
FEATURES
MENU
INDEX
ABOUT US
Removing and installing clutch (Sachs version) >
< Clutch: Repairing (in conjunction with a dual mass flywheel)
Leon Mk2
OA4 5-speed manual gearbox
Clutch, control
Coupling unit / utch_repairing_(in_conjunction_with_a_dual_mass_flywheel)/">Clutch: Repairing (in conjunction with a dual mass flywheel)
Clutch identification
Clutch identification
Clutch identification
If the gearbox is installed, the following procedure described must be carried out:
–
Remove the lower sound insulation
→ Body, exterior installation work; Rep. gr.50
.
There are a couple of notches
-arrows-
between the engine
-A-
and the gearbox
-B-
under the engine oil sump.
–
Check outer contour of flywheel through these notches.
–
The outer side of the flywheel can also be inspected after removing the small cover plate
-A-
.
Round exterior
-arrows-
= Clutch from the firm Sachs =
-A-
–
Removing and installing the Sachs clutch
→ Chapter
–
Sachs clutch: repairs
→ Chapter
Outer contour with edges
-arrows 1-
and, in addition, a circumferential crease
-arrow 2-
= LuK clutch =
-B-
or
Rounded outer contour
-arrows 1-
and a circumferential crease
-arrow 2-
= LuK clutch =
-B-
–
Removing and installing the LuK clutch
→ Chapter
–
LuK clutch: repairs
→ Chapter
OA4 5-speed manual gearbox
Clutch, control
Coupling unit / utch_repairing_(in_conjunction_with_a_dual_mass_flywheel)/">Clutch: Repairing (in conjunction with a dual mass flywheel)
Clutch identification
Removing and installing clutch (Sachs version) >
< Clutch: Repairing (in conjunction with a dual mass flywheel)