seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Knob with a black plastic part > < Selector lever knob: removal and fitting

Leon Mk2

Knob with a red-brown plastic part
Knob with a red-brown plastic part
Removing
–  Pull on the knob only, without pressing the button.
  Note!
If, by error, the button were inserted into the knob, it can be carefully removed with compressed air.
Fitting
   
–  Before fitting, make sure the button projects at least 10 mm -measurement “a”-.
–  Remove the button by hand until the housing point is exceeded and press the knob onto the selector lever.
  N37-0983

Knob with a black plastic part > < Selector lever knob: removal and fitting