seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Understood as: > < Calculating the shims

Leon Mk2

Differential: adjusting
Differential: adjusting
Special tools and workshop equipment required
   
t  Torque spanners -SAT 8010-
  W00-2760
t  Fitting tool -T20023-
  Note!
Always replace the O ring in the bearing body.
  W00-2303
–  Screw the bearing body into the housing of the gearbox casing.
–  Use tool -T20023- and torque spanner -SAT 8010-.
Tightening torque: 150 Nm
  E39-0048
–  Screw the adjustment ring into the housing of the gearbox casing.
–  Use tool -T20023- and torque spanner -SAT 8010-.
Tightening torque: 50 Nm
  E39-0039
–  Make a mark with a centre punch on the adjustment ring -arrow-.
  Note!
When adjusting do not turn the differential, because the roller bearings may settle and the reading would be erroneous.
–  To adjust the pretension of the differential roller bearings, turn the adjustment ring 5 tabs from the centre punch mark.
  V39-1395

Understood as: > < Calculating the shims