Leon Mk2
| Cooling system components, bodywork side |
| 1 - | Tightening piece |
| 2 - | 10 Nm |
| 3 - | Radiator |
| q | Removing and installing → Chapter |
| q | After replacing, renew all coolant |
| 4 - | Lock carrier |
| 5 - | Toothed belt |
| q | According to versions |
| 6 - | Fan ring |
| q | Note fitting position |
| 7 - | Radiator fan -V7- |
| q | Removing and installing → Chapter |
| 8 - | Upper hose |
| q | To the coolant distributor |
| 9 - | Lower hose |
| q | To the coolant pump |
| 10 - | Additional fan |
| q | According to versions |
| 11 - | Fan screen |
| 12 - | Connector |
| 13 - | Cover |
| 14 - | Expansion tank |
| q | Check for leaking with the -V.A.G 1274- kit and the -V.A.G 1274/3- adaptor |
| 15 - | To the coolant hose |
| 16 - | To the measurement hose |
| 17 - | Expansion tank cap |
| q | Check valve with the -V.A.G 1274- kit and the -V.A.G 1274/4- adaptor → |
| 18 - | Thermoswitch -F18- |
| q | 35 Nm |
| 19 - | Rubber washer |
| 20 - | Air duct |
