seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Sealing flange - pulley side: removing and installing|Install > < Sealing flange - pulley side: removing and installing

Leon Mk2

Remove
Remove
–  Remove the Poly-V belt → Chapter
–  Remove the toothed belt → Chapter
   
–  Remove the toothed belt-crankshaft pinion. To do so, immobilise the toothed belt pinion with the -T20018A-.
–  Drain the engine oil.
–  Remove the oil sump → Chapter
–  Remove the bolts that hold the front sealing flange.
–  Remove the sealing flange. If necessary, loosen it with taps from a rubber mallet.
–  Eliminate excess sealant from the engine block with a flat scrapper.
–  Cover the seal with a clean cloth.
  E13-0106
–  With a rotating plastic brush, eliminate excess sealant from the sealing flange (use shop goggles).
–  Clean the contact surfaces of oil and grease.
  A17-0030

Sealing flange - pulley side: removing and installing|Install > < Sealing flange - pulley side: removing and installing