seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Engine: Install > < Engine and gearbox: Separate

Leon Mk2

Engine: securing the engine to engine bracket
Engine: securing the engine to engine bracket
Special tools and workshop equipment required
   
t  attachment tool -T20127-
  W00-2409
t  Counterhold -T20172B- with adapter -T20172/3-
t  Workshop crane
Premise
l  Gearbox is separated from engine
Operation process
  Note
To align the assembly centre fit the counterhold -T20127- to the anchorage points as shown in the figure.
  L00-10210
–  Insert struts of the retaining device -T20127-. into the corresponding anchorage points.
  DANGER!
Ensure that the hooks are closed with the security rings.
–  Raise the engine from the counterhold lifting it using the workshop crane -T10012- and lower it.
  Note
If operations are to be carried out on the crankshaft or on the sealing flange, the engine flywheel and intermediate plate must be removed before attachment to the counterhold -T20172B- .
  E10-0109
–  For assembly work, secure the engine with the adapter -T20172/3- to the lifting harness -T20172B-.
  E10-10005

Engine: Install > < Engine and gearbox: Separate