| Removing and fitting - components overview |
Note | t
| All of the hose connections should be well secured |
| t
| The supercharger air system should not leak |
| t
| Renew self-locking nuts. |
| t
| Fill the turbocharger using engine oil, for the connection junction before tightening the oil feed tube. |
| t
| Following the fitting of the turbocharger, start the engine and let it idle for about 1 minute without accelerating. In this way, lubrication of the turbocharger is guaranteed. |
| t
| Engine identification letters BNV and BNM → Chapter |
|
|
|
