Leon Mk2
Engine code BNV, BNM, BMS |
1 - | Fuel filter: |
q | Fill with fuel before fitting |
q | The flow direction is marked by arrows |
q | Do not interchange the connections |
q | If this is damaged, replace it |
q | Observe change intervals. |
2 - | Regulation valve |
q | With a temperature below +15 °C: Passage to open filter |
q | With a temperature above +30 ℃: Passage to closed filter |
3 - | Supply pipe |
q | Going to the tandem pump |
q | White or with white marking. |
q | Check for secure seating |
4 - | Return pipe |
q | To fuel tank |
q | Check for secure seating |
q | Blue colour or blue mark |
5 - | Return pipe |
q | Coming from the tandem pump |
q | Check for secure seating |
q | Blue colour or blue mark |
6 - | Supply pipe |
q | Going to the tandem pump |
q | White or with white marking. |
q | Check for secure seating |
7 - | Fuel temperature sensor -G81- |
8 - | Seal |
q | Renew |
9 - | Coming from the tandem pump |
10 - | Return pipe |
q | With the connection support for the fuel temperature sender -G81- |
11 - | Clip |
q | Check for secure seating |
12 - | 25 Nm |
q | 3 off |
13 - | Retainer |
q | Depending on version |
14 - | Filter housing |