Leon Mk2
Engine: dismounting |
Special tools and workshop equipment required |
t | Hose clamps -3094-, see equivalent → Anchor |
t | Torque wrench -V.A.G 1331-, see equivalent → Anchor. |
t | Torque wrench -V.A.G 1332-, see equivalent → Anchor. |
t | Engine/gearbox crane -V.A.G 1383 A-, see equivalent → Anchor |
t | Stepladder -VAS 5085-, see equivalent → Anchor |
t | Engine bracket -T40076-, see equivalent → Anchor |
t | Transport lock for the decoupling element -T10403-, see equivalent → Anchor |
t | Torque wrench -V.A.G 1332-, see equivalent → Anchor. |
t | Engine sealing plug set -VAS 6122-, see equivalent → Anchor |
t | Collector tray for workshop crane -VAS 6208-, see equivalent → Anchor |
t | Hose clamp pliers -VAS 6340-, see equivalent → Anchor |
t | Grease (vehicles with manual gearbox) -G 000 100- |
t | Cable tie |
|
Note
|
|
|
Note
|
|
|
|
|
|
|
|
|
Note
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Note
|
|
|
|
1. | Remove the fixing bracket -1- between the particle filter and the exhaust gas turbocharger. | |
2. | Remove bolts -2 ... 3-. | |
3. | Remove bolts -4-. | |
4. | Unscrew nuts -5- |
Note
|
|
|
Note
|
|
|
|
Note
|
Note
|
|