Leon Mk2
Assembly overview - oil supply line and oil return (turbocharger support) |
1 - | Oil return pipe |
2 - | Seal |
q | Replace |
3 - | Bolt. |
q | 20 Nm |
4 - | O-ring |
q | Replace |
5 - | Bolt. |
q | 20 Nm |
6 - | Oil return (turbocharger support) |
7 - | Bolt. |
q | 10 Nm |
8 - | O-ring |
q | Different diameters |
q | Renew together with banjo bolt. |
9 - | Banjo bolt |
q | 60 Nm |
q | Renew together with O-rings. |
10 - | Oil seals |
q | Renew together with banjo bolt. |
11 - | Banjo bolt |
q | 30 Nm |
q | Renew together with seals. |
12 - | Seal |
q | Replace |
13 - | Connection pipe to exhaust gas recirculation cooler |
q | With flexible joint; do not bend flexible joint - danger of cracking. |
q | Renew seals and gaskets. |
14 - | Nuts |
q | 25 Nm |
q | Replace |
15 - | Bolts |
q | 25 Nm |
q | Replace |
16 - | Seal |
q | Replace |
17 - | Union nut for oil supply line |
q | 22 Nm |
q | To loosen and tighten, counterhold the threaded connection on the turbocharger. |