SEAT Workshop Service and Repair Manuals > Leon Mk2 > Power unit | 3 cylinder Diesel engine (1.2 litre engine, Common Rail) | Fuel supply, gas operation | Parts of fuel supply system | Removing and installing fuel gauge senderG6

Removal:

Observe safety precautions → Chapter.

Observe rules for cleanliness → Chapter.

–	Remove fuel delivery unit → Chapter.

–	Push the fuel level sender -G- slightly inwards in the -direction of the arrow- and at the same time remove upwards in the -direction of the arrow-.

–	If the sender cannot be released in this way, the securing tabs -arrows- must also be pushed to the side slightly.

–	Note colour co-ordination of cables for reinstallation.

–	Unlock the connector tabs -1 … 3-, inserting a fine screwdriver through the holes -arrows- and disconnect the connectors.

SEAT Workshop Service and Repair Manuals