Leon Mk2
Ignition system - Components overview |
1 - | Ignition coil 1 with output stage -N70-, ignition coil 2 with output stage -N127- and ignition coil 3 with output stage -N291- |
q | Remove with extractor -T10094- |
2 - | Electric connector |
q | 4-pin, black |
3 - | Electric connector |
q | 2-pin, black |
q | For knock sensor I -G61- |
q | Connector contacts are gold-plated |
4 - | 20 Nm |
q | Tightening torque affects the knock sensor function |
5 - | Knock sensor 1 -G61- |
q | Fitting location → Item |
q | check → Chapter |
6 - | 10 Nm |
7 - | Electric connector |
q | 3-pin, black |
q | for Hall sender -G40- |
8 - | Hall sender -G40- |
q | check → Chapter |
9 - | O ring |
q | Replace if damaged |
10 - | Electric connector |
q | 3-pin, black |
q | For engine speed sender -G28- |
11 - | Engine speed sender -G28- |
q | Fitting location → Item |
q | check → Chapter |
12 - | 8 Nm |
13 - | Spark plug, 30 Nm |
q | Remove and install with wrench -T20175- . |
q | Type and electrode gap → Chapter, Test data, spark plugs |