seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Air filter: Removing and installing > < Renewing Teflon seal and support washer on injector

Leon Mk2

Assembly overview - air filter
Assembly overview - air filter
  Note
t  Standard sheet metal screws are used for fitting of the upper part of the air filter over the lower part. When these screws/bolts are loosed or tightened using a power tool the threads in the intake manifold or the air cleaner lower part may be damaged.
t  Therefore, the use of a power tool can only be allowed when:
t  The power tool maximum speed is 200 rpm.
t  A specified torque of max 1.6 Nm is set.
   
1 - Top part of air cleaner
2 - Bolt.
q   4 units
q   1.6 Nm
3 - Filter element
4 - Air cleaner housing
5 - Locating bolt
q   8 Nm
6 - Rubber / metal bearing
7 - Bolt.
8 - Rubber bearing
9 - Suction line
10 - Rubber bearing
11 - Hose
q   From cylinder head cover
12 - Spring-type hose clip
q   2 units
13 - Suction line
q   To throttle valve module -J338-

   

Air filter: Removing and installing > < Renewing Teflon seal and support washer on injector