Leon Mk2
Assembly overview - radiator/radiator fan |
1 - | Radiator |
q | Removing and installing → Chapter. |
q | Coolant hose schematic diagram → Chapter. |
q | After renewing, renew entire coolant → Chapter |
2 - | Sealing cap |
q | check → Chapter |
q | Check using cooling system tester -V.A.G 1274 B- and adapter for cooling system tester -V.A.G 1274/9-. |
q | Test pressure 1.4 … 1.6 bar |
3 - | Expansion tank |
q | Checking fuel system for leaks → Chapter |
q | Test cooling system for leaks using cooling system tester -V.A.G 1274 B- and adapter for cooling system tester -V.A.G 1274/8-. |
q | Coolant hose schematic diagram → Chapter. |
4 - | Coolant hose |
q | Coolant hose schematic diagram → Chapter. |
q | Check for secure seating. |
5 - | Radiator mount |
q | For radiator |
q | Note fitting position: |
q | Note locking mechanism → Fig.. |
6 - | Upper coolant hose |
q | Coolant hose schematic diagram → Chapter. |
q | Check for secure seating. |
7 - | Radiator fan |
q | Removing and installing → Chapter. |
8 - | Cowling |
q | Removing and installing → Chapter. |
9 - | Bolt. |
q | Installation radiator fan on cowling |
q | 10 Nm |
10 - | Bolt. |
q | Coupling point connector |
q | 3 Nm |
11 - | Electric connector |
12 - | Radiator fan thermo-switch -F18- |
q | Removing and installing → Chapter. |
q | 50 Nm |
q | For radiator fan. |
q | Not fitted on all vehicles |
Switching temperatures |
q | 1st level on: 92…97°C, off: 84…91°C |
q | 2nd level on: 99…105 °C, off: 91…98 °C |
13 - | Radiator mount |
q | Check for secure seating. |
14 - | Lower coolant hose |
q | Coolant hose schematic diagram → Chapter. |
q | Check for secure seating. |
|