seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Crankshaft > < Checking sender wheel installation position on crankshaft

Leon Mk2

Re-pressing sender wheel
Re-pressing sender wheel
   
–  Secure assembly tool -T10134- to crankshaft flange with hexagon socket head bolts -A-.
–  Tighten the two hexagon socket head bolts -A- hand-tight.
–  Push the assembly tool -T10134- against the sealing flange by hand.
  N13-10044
–  Screw hexagon nut -E- onto threaded spindle by hand until it lies against assembly housing -C-.
  N13-10084
–  Tighten hexagon nut of assembly tool -T10134- with torque wrench -V.A.G 1331- and tool insert AF 24 -V.A.G 1332/11- to 40 Nm.
–  Check the sender wheel installation position on crankshaft again → Chapter
If dimension »a« is too small again:
–  Tighten hexagon nut to 45 Nm using assembly tool -T10134-.
–  Check the sender wheel installation position on crankshaft again → Chapter
  N13-10085

Crankshaft > < Checking sender wheel installation position on crankshaft