Leon Mk2
Assembly overview - intake manifold |
1 - | Bolt. |
q | 7 Nm |
q | Quantity 3 units |
2 - | Throttle valve control mechanism -J338- |
q | Clean → Chapter. |
q | 6-pin connector |
q | Gold plated contacts |
q | Removing and installing → Chapter. |
q | If renewed, adapt engine control unit -J623- to throttle valve module -J338- → Vehicle diagnostic tester„Guided functions“ |
3 - | Oil seal |
q | Replace if damaged |
4 - | Bolt. |
q | 8 Nm |
q | Quantity 5 units |
5 - | Bolt. |
q | 7 Nm |
q | For fuel rail |
6 - | Intake manifold pressure sender -G71- with intake air temperature sender -G42- |
q | Removing and installing → Chapter. |
q | Repairing solution for missing locking tab → Chapter |
q | 3 Nm |
q | 4-pin connector |
q | Gold plated contacts |
7 - | O ring |
q | Replace if damaged |
8 - | Intake manifold |
q | Removing and installing → Chapter. |
9 - | Bolt. |
q | 20 Nm |
10 - | Oil seal |
q | Replace if damaged |
11 - | Oil seal |
q | Replace if damaged |