seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Installing > < Renewing valve stem seals

Leon Mk2

Removing
Removing
(With cylinder head fitted)
–  Remove camshaft → Chapter.
–  Remove the bucket tappets and place them with the contact surface downwards. When doing this ensure that the tappets are not interchanged.
–  Set piston of respective cylinder to top dead centre (TDC).
   
–  Use mounting device -T20034-.
–  Remove valve springs with lever -T20034- and press piece -T20034- Ø 35.
  Note!
The valves are supported by the piston crown.
  E15-0024
–  Remove the valve guide seals with the tool -T20058-.
  E15-0025

Installing > < Renewing valve stem seals