seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Installing > < Removing and installing front sealing flange

Leon Mk2

Remove
Remove
–  Remove ribbed belt → Chapter.
–  Remove toothed belt → Chapter.
   
–  Remove crankshaft toothed belt sprocket. To do this counter-hold sprocket with tool -T20018-.
–  Remove sump → Chapter.
–  Unbolt front sealing flange.
–  Take off sealing flange, release using light blows with a rubber headed hammer if necessary.
–  Remove sealant residue on cylinder block with a flat scraper.
  E13-0016
–  Remove sealant remains on sealing flange with a rotating plastic brush (wear protective goggles).
–  Clean sealing surface, must be free of oil and grease.
  A17-0030

Installing > < Removing and installing front sealing flange