Leon Mk2
| Engine codes AGP, AQM |
| Components A to D are not shown on the illustration. |
| A - | Brake pedal switch -F47- |
| q | In footwell on brake pedal |
| B - | Brake light switch -F- |
| q | In footwell on brake pedal |
| C - | Accelerator pedal position sender -G79- |
| q | In footwell on accelerator → Chapter |
| D - | Clutch pedal switch -F36- |
| q | In footwell on clutch pedal |
| 1 - | Exhaust gas recirculation valve |
| 2 - | Exhaust gas recirculation valve -N18- |
| 3 - | Coolant temperature sender -G62- |
| 4 - | Diesel direct injection system control unit -J248- |
| 5 - | Intake manifold temperature transmitter -G72- |
| 6 - | Intake manifold regulating flap unit -N239- |
| q | Renew complete unit |
| q | Repairing → Chapter |
| 7 - | Engine speed sender -G28- |
| 8 - | Connector |
| q | For needle lift sender -G80- |
| 9 - | Connector |
| q | For engine speed sender -G28- |
| 10 - | Connector |
| q | For fuel temperature sender -G81- |
| q | For quantity adjuster -N146- |
| q | For modulating piston movement sender -G149- |
| q | For fuel shut-off valve -N109- |
| q | For commencement of injection valve -N108- |
| 11 - | Injection with needle stroke transmitter-G80- |
| 12 - | Commencement of injection valve -N108- |
| 13 - | Fuel cut-off valve -N109- |
| 14 - | Injection pump quantity adjuster |
| q | With fuel temperature sender |
| q | With quantity adjuster -N146- |
| q | With modulating piston movement sender -G149- |
