SEAT Workshop Service and Repair Manuals > Leon Mk2 > Power unit | 4-cyl. diesel engine | Fuel supply, gas operation | Removing and installing parts of fuel supply system

Servicing accelerator mechanism

1 -

Support

2 -	Accelerator pedal position sender -G79-

q	Checking → VAS 5051

q	Adjusting → VAS 5051

3 -

10 Nm

4 -	Cable pulley

q	Installing → Fig.

5 -	Expandable washer

6 -	Adjustment screw

7 -

20 Nm

8 -	Accelerator pedal

9 -	Hexagonal nut M8

Switches in area of footrest

1 -	Clutch pedal switch

2 -	Brake pedal switch

3 -	Brake light switch

Install cable pulley

–	Bolt the cable pulley to the transmitter in accordance with the indicated dimensions, facing forward.

a = 22 ± 0,05 mm

b = 41 ± 0,05 mm

c = forward

Note!

The eye of the pulley must be parallel to the direction of travel.

SEAT Workshop Service and Repair Manuals